Power 1 C Mounting Foam
Areas of application
EVT Power 1C Mounting Foam may be used for the mounting and insulation of window and door frames, the insulation of window sills, gap filling of pipe lead-throughs and the bonding of panels and slabs.
Properties
EVT Power 1C Mounting Foam adheres to all building materials, with the exception of polyethylene, teflon, silicone, grease, mould release agents or similar. The fully cured foam is a semi-rigid, primarily closed-pore substance; it is non-ageing and heat resistant, but not UV-resistant. One can will yield up to 40 litres (750 ml can) or 30 litres (500 ml can).
Application
Shake the can approx. 30 times before use, screw on the adapter tube and turn the can upside down. To achieve an optimum level of curing, moisten surface with water. Insufficient amounts of moisture my necessitate the reapplication of foam. Only fill one third of any cavity, as moist foam will expand.
Storage
In cool and dry environments, EVT 1C Mounting Foam can be stored for at least 12 months.
Colours / Delivery Forms / Item Codes
can 500 ml | 62363 |
can 750 ml | 62365 |